Seatpost Support
Supporting tech articles & documents for our Thudbuster and eeSilk seatposts
To change elastomers on your Thudbuster ST please refer to the resources below: Gen 4 Thudbuster ST Instruction manual
Tue, 16 Jun, 2020 at 3:46 PM
The Thudbuster LT suspension mechanism has a minimum extension of 146mm (5.74 inches). This means you need at least 146mm (5.74 inches) of clearance be...
Wed, 17 Jun, 2020 at 3:00 PM
The Thudbuster ST suspension mechanism has a minimum extension of 100mm (3.93 inches). This means you need at least 100mm (3.93 inches) of clearance be...
Wed, 17 Jun, 2020 at 3:02 PM
Yes, the Thudbuster ST and Thudbuster LT can be tuned to your rider weight by switching out the elastomer that is installed in your seatpost. Plea...
Thu, 18 Jun, 2020 at 2:11 PM
The Thudbuster elastomer could be ejected from your Thudbuster seatpost in the following scenarios : Improperly installed elastomer The thudbuster s...
Thu, 18 Jun, 2020 at 2:28 PM
The newest (generation 4) Thudbuster ST Has a maximum rider weight of: 330lbs ...
Thu, 18 Jun, 2020 at 12:03 PM
Both the Gen 3 and the new Gen 4 Thudbster LT's have a maximum rider weight of: 250lbs
Thu, 18 Jun, 2020 at 12:09 PM
No, the Thudbuster is a complete seatpost. The suspension mechanism is not designed to be retrofitted to any other seatpost.
Thu, 18 Jun, 2020 at 3:09 PM
The minimum insertion line for all Thudbuster models is 100mm, that means you MUST have at least 100mm or more of seatpost that is inside of your bicycl...
Thu, 18 Jun, 2020 at 3:49 PM
The minimum insertion line for all Thudbuster models is 100mm, that means you MUST have at least 100mm or more of seatpost that is inside of your bicycl...
Thu, 18 Jun, 2020 at 3:50 PM