The Serial Number of your HELM or HELM MKII can be found on the fork's steerer tube.
Thu, 18 Jun, 2020 at 9:43 AM
Yes, all Helm forks are Boost front spacing (110mm). A non-boost front wheel can be used with the appropriate hub /axle spacer kit.
Thu, 18 Jun, 2020 at 3:58 PM
Helm Air 27.5 = 170mm - 100mm Helm Coil 27.5, Helm Coil 29 and Helm Air 29 = 160mm - 100mm HELM Works Series = 130mm - 100mm Helm Forks are travel ad...
Fri, 19 Jun, 2020 at 2:24 PM
Helm’s air spring curve is adjusted internally by an indexed rod and static piston assembly, no additional parts need to be purchased to perform this change...
Fri, 19 Jun, 2020 at 2:30 PM
Helm MKII User Manual
Wed, 24 Jun, 2020 at 2:01 PM
The new SKF wiper seals will are a running change to the 50 hour service kit and will be used in all factory and service center 100 hour service rebuilds an...
Mon, 21 Dec, 2020 at 12:43 PM
We decided to include the mounts on the arch with the intention of offering a fender, however we have not been able to produce a cost effective, Cane Creek ...
Mon, 29 Jun, 2020 at 11:30 AM
We recommend a bath oil change every 50 hours between your 100 hour factory service. Any shop or end user that is comfortable with suspension can perform th...
Tue, 30 Jun, 2020 at 11:21 AM
Helm 50 Hour Service Instructions
Tue, 30 Jun, 2020 at 11:24 AM
It is possible to have your HELM fork converted from Air to Coil as part of a 100 hour service at an authorized service center or through direct factory ser...
Thu, 23 Sep, 2021 at 1:21 PM